Technical Data; Disposal - CTC EC 7012 Mode D'emploi

Troubleshooting
Problem Cause
The device The device is
cannot be blocked and
operated. "hangs".
No sound. Volume is too low. Increase the volume.
No audio The device is not
signal during registered with the
bluetooth audio source.
connection.
Volume too low.
Device can Registration does
not be con­ not work.
nected.
Audio source is
shut off.
Bluetooth is shut
off on the audio
source.
Bluetooth version
is not supported.
Sharp Audio feedback.
whistling
sound during
microphone
operation.

Technical Data

Model:..........................................................................EC 7012
Power supply:................................. AC 100 – 240 V~ 50 / 60 Hz
Battery operation: ............................................. 12 V, 4000 mAh
Charging time: ..........................................approx. 5,5 hours
Operating time: ..............................................up to 10 hours
Power consumption: ......................................................... 36 W
Protection class: ......................................................................
Net weight: .............................................................approx. 7 kg
Bluetooth
Bluetooth support: ................................................... V 2.1+EDR
Maximum radio­frequency power transmitted: ............. 2.5 mW
Range: .......................................................... approx. 15 meters
Transmitting frequency: ...............................2.402 − 2.480 GHz
Protocols: .......................................................... A2DP / AVRCP
The right to make technical and design modifications in the
course of continuous product development remains reserved.
EC7012_CTC_IM
Hereby, CTC Clatronic International GmbH declares that the
Solution
radio equipment type EC 7012 is in compliance with Directive
Switch the device off
2014 / 53 / EU.
and disconnect the
The full text of the EU declaration of conformity is available at
power plug from the
the following internet address: www.sli24.de
socket for about 5 sec­
In the "Download" area, please enter the model name
onds. Then switch the
EC 7012.
device on again.
Tested for operation in Great Britain.
Ensure that there is a
connection. Register
the device with the
Meaning of the "Dustbin" Symbol
audio source again, if
necessary.
Increase the volume
on the device.
Increase the volume
on the audio source.
This helps avoid the potential effects of incorrect disposal on
Check to see if the
the environment and human health.
audio source supports
This will contribute to the recycling and other forms of re­utili­
the A2DP protocol.
sation of electrical and electronic equipment.
Turn on the audio
source. Information concerning where the equipment can be dis­
posed of can be obtained from your local authority.
Turn on the Bluetooth
function on the audio
Disposal of Batteries
source.
Use a different play­
back device.
Use the microphone
outside of the speak­
er's reverberation
distance.
Information on where the battery must be disposed of can be
found via your local authorities or municipalities.
Notice of Directive Conformity

Disposal

Protect our environment: do not dispose of elec­
trical equipment in the domestic waste.
Please return any electrical equipment that
you will no longer use to the collection points
provided for their disposal.
The device includes a rechargeable battery.
Used batteries do not belong in household
waste.
The battery must be removed before the prod­
uct is disposed of. Contact qualified specialists
to do so.
27
21.09.17