Overview Of The Components; Battery Operation; General Operation - CTC EC 7012 Mode D'emploi

Overview of the Components

1 Extendable handle
2 Carrying handle
3 Display
4 USB port
5 AUX IN port
6 VOLUME control (Volume)
7 POWER ON / OFF switch
8 AC ~ power cord connection
9 / button (Play / Pause / Pairing)
10 button (Next music file)
11 button (Previous music file)
12 EQ / ECHO button (Equaliser / Microphone echo)
13 FOLD. / 10+ button
14 P­MODE button (USB playback mode)
15 FUNCTION / button
16 Indicator lamp CHARGE (Battery is charging)
17 MIC VOL Regler (Microphone volume)
18 MIC 2 Buchse (Microphone input)
19 MIC 1 Buchse (Microphone input)
20 Indicator lamp PAIR (Bluetooth)
Scope of Delivery (not shown)
1 x Microphone
1 x Mains cable
First Use of the Device
• Choose a suitable location for the device. Suitable loca­
tions are dry, even and antislip surfaces on which you may
operate the device easily.
• Make sure there is proper ventilation for the device!
• Sensitive surfaces such as the display may be protected
by plastic foil. Remove this foil.
Power Supply
1. Make sure the grid voltage corresponds to the figures on
the rating plate.
2. Connect the supplied power cord with the AC ~ connec­
tion.
3. Insert the mains plug to a properly installed socket.
NOTE:
• The charging of the battery begins as soon as the power
plug is inserted into the socket.
• Disconnect from mains power supply during longer
periods of non­use.

Battery Operation

It is possible to operate this device with the built­in battery.
General Information
• Charge the battery completely before you use it to operate
the device.
• Avoid fully discharging the battery.
24
EC7012_CTC_IM
• Charge the battery completely after each use.
• As soon as the indicator lamp CHARGE (16) lights red,
the battery must be charged.
Charging the Battery
1. Connect the supplied power cord with the AC ~ connec­
tion.
2. Connect the mains plug to a properly installed socket.
3. The indicator lamp CHARGE (16) lights red and the
battery is being charged.
4. When the battery has been charged completely, the
indicator lamp CHARGE lights green.
Depending on the battery's capacity charging can take up to
6 hours.
CAUTION:
Never leave the device unattended during charging.
NOTE:
• The charging time varies according to battery use.
• If the device is out of use for a long period of time,
charge the battery at least once every 4 to 8 weeks. The
battery will also constantly discharge when switched off.

General Operation

Switch the Device On / Off
• Set the POWER switch to position "ON". The lighting
around the VOLUME control illuminates.
NOTE:
After approx. 15 minutes without signal or with very poor
signal, the device will automatically switch to standby.
Press the button FUNCTION /
• To turn off the device completely, set the POWER switch
to position "OFF". Disconnect the mains plug from the
socket.
Volume
Use the VOLUME control to adjust the volume as desired.
Select the Operating Mode
Repeatedly press the FUNCTION /
desired operating mode.
USB Bluetooth
Sound Settings
If you press the EQ / ECHO button repeatedly, you can select
between the different sound modes. Choose one of the fol­
lowing settings: ROCK, BASS, FLAT, POP, CLASSIC, JAZZ.
NOTE:
• The device always starts with the setting "ROCK".
• If necessary, adjust the EQ settings on your playback
device in order to generate a better sound.
to use the device again.
button to select the
AUX
21.09.17