Ltc Audio BT-WAKEUP Manuel D'utilisation page 2

FM RADIO-CLOCK WITH BLUETOOTH SPEAKER, TOUCH-SENSITIVE RGB LAMP & PHONE FUNCTION
Contents:
1x Bluetooth speaker lamp
1x USB lead
1x 3.5mm audio lead
1x user manual
Introduction
The illuminated Bluetooth speaker contains a touch-sensitive lamp that can be easily switched on and off or adjusted to different
brightness levels by the touch of a hand at the top center of the product. It integrates an audio player (Bluetooth, SD, Line) with
FM player and clock function.
Functions of the buttons and indicators
1. Power switch : It cuts completely the power supply. The unit can't be switched on if this switch is off.
2. Setting of the alarm mode
3. Sleep indicator: It lights up when the sleep mode is activated.
4. Sleep: Turns the automatic sleep mode on and off
5. Alarm On/Off
6. Setting of the clock
7. USB charging port: Micro USB port to charge the built-in battery
8. Charging indicator
9. TF port
10. Line input
11. Microphone (for hands-free calls)
12. LED display
13. Mode switch allowing to select the operation mode: Bluetooth, TF, Line, FM)
14. Skip backwards/reduce volume/ reduce value
15. Skip forwards/increase volume/increase value
16. Play/Pause/Pick up
17. ON/OFF switch to wake up the unit after a low battery alarm
Operating instructions
Power ON and Charging
Caution: Turn on the power switch (1) by pressing with a pin prior to using the product for the first time. For safety reasons,
the product is switched off during transport. The unit will not work if this switch hasn't been pressed!
Charge the battery with the supplied USB lead which is compatible with any cell phone charger. The output voltage is 5V and the
output current should be 1000mA and above.
The charging indicator (8) lights red during charge and goes off when the speaker is fully charged.
©Copyright Lotronic 2017
GB
2