Before First-Time Use; Inserting The Batteries; Replacing The Batteries; Switching The Barbecue - GRILL MEISTER 967-UL Instructions D'utilisation

Avoid contact with skin, eyes and mucous
„
membranes! In the event of skin contact
with battery acid, rinse the affected area
immediately with plenty of clean water and
seek medical advice immediately!
WEAR PROTECTIVE GLOVES!
„
Leaking or damaged batteries/
rechargeable batteries can cause
chemical burns if they come into contact
with the skin� Therefore, always wear
suitable protective gloves in such situations�
In the event that a battery leaks, remove it
„
from the product immediately to avoid
damage�
z Before first-time use
Completely remove the packaging material
und check the barbecue lamp for damage�
Should you find any, register a complaint
about the barbecue lamp as described in the
section "Warranty claim processing"�
z Inserting the batteries
Unscrew the battery compartment cover
(see Fig� E) and take out the battery holder
� Place the 3 type AAA/LR03 batteries in
8
the battery holder
8
terminals match up with the terminal labels
marked on the battery holder� Slot the
battery holder into the casing
8
barbecue lamp, making sure that the arrow
on the battery holder
the barbecue lamp (see Fig� F)� Now screw
the battery compartment cover
the barbecue lamp�
z Replacing the batteries
Unscrew the battery compartment cover
(see Fig� E) and take out the battery holder
� Place the 3 type AAA/LR03 batteries in
8
the battery holder
8
terminals match up with the terminal labels
marked on the battery holder� Slot the
3
, making sure the
of the
4
is pointing towards
8
back on
3
3
, making sure the
battery holder into the casing
8
barbecue lamp, making sure that the arrow
on the battery holder
the barbecue lamp (see Fig� F)� Now screw
the battery compartment cover
the barbecue lamp�
z Switching the barbecue

lamp ON/OFF

The barbecue lamp can be switched on/off
„
by means of the ON/OFF switch
z Fixing/setting up the

barbecue lamp

Only suitable for manual operation�
„
Alternatively, the barbecue lamp can be
attached to a metallic object by means of
the magnet � Make sure that the surface
6
is flat and level to ensure the lamp is firmly
attached� Surfaces that are easily marked
should be protected against potential
damage before you stand the lamp on
them�
z Cleaning and storage
Switch off the product by pressing the ON/
OFF switch if you wish to clean it or stop
5
using it and store it away (see Fig� A)�
Regularly inspect the barbecue lamp for dirt
„
and contamination� Remove any dirt to
ensure the barbecue lamp works correctly�
Clean parts to
„
1
slightly moistened, lint-free cloth and a mild
detergent�
The battery holder
„
with a dry cloth in order to avoid damage
due to moisture (see Fig� D)�
Caution! When cleaning the product,
make sure that the screw mounting of the
flexible 360° lamp arm
OFF switch does not come loose in the
5
process� The wires inside it could be pulled
out and damage the barbecue lamp or
of the
4
is pointing towards
8
back on
3
�
5
(see Fig� A) with a
5
must only be cleaned
8
above the ON/
1
GB
25