Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.
DO NOT USE THE TOOL STAND OR WORK CENTER AS A SCAFFOLD. Injury may result if the Tool Stand or Work Center is used as a scaffold or
platform for workers.
2.
AVOID DANGEROUS ENVIRONMENTS. Use your Tool Stand or Work Center on flat, level, dry, and hard surfaces only.
3.
KEEP WORK AREA CLEAN AND WELL LIT. Cluttered, dark work areas invite accidents.
4.
THE TOOL STAND OR WORK CENTER WEIGHT LIMIT IS 500 POUNDS. If more than 500 pounds is placed on the Tool Stand or Work Center it may
be damaged and may cause personal injury.
5.
MAINTAIN CONTROL. Keep proper footing and balance at all times.
6.
MAINTAIN TOOL STAND OR WORK CENTER CAREFULLY. Keep Tool Stand or Work Center dry, clean and free from oil and grease. Follow instruc-
tions for changing accessories. Periodically inspect Tool Stand or Work Center for damage and wear.
7.
MAINTAIN LABELS. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.
8.
KEEP BYSTANDERS AWAY. Children and bystanders should be kept at a safe distance from the work area to avoid distracting the operator.
9.
UNPLUG TOOL when it is not in use, before changing accessories or performing recommended maintenance.
Page 2
SPECIFIC SAFETY RULES- TOOL STANDS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below, may result
in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Publicité
Table des Matières
