Permanent Mains Water Connection - Teuco 641 HR Manuel De L'utilisateur

If the writing "H2O" appears on the display, the
hydromassage pump has not switched on.
Add water to the minipool until the writing "H2O"
disappears from the display and the unit can then be
switched on.
Attention: Sometimes the unit does not switch
on if air has accumulated in it. To release the air
from the system, slacken the ring of the pump
until the hydromassage or the recirculation
system switches on, then retighten the ring.
PERMANENT MAINS WATER CONNECTION (Optional)
It is possible to connect the minipool permanently to the
domestic water mains to make filling operations easier,
using a G1/2 fitting.
The connection between the minipool and the domestic
water mains requires compliance with specific
regulations.
Therefore, we recommend that you call your water
company for more information as to any special
procedures or auxiliary devices (not provided by Teuco)
that may be necessary.
The minipool is not fitted with an overflow device and
therefore, filling operations need to be supervised at all
times.
641 HR-HS
EN
7