EN
TV Menu operation
TV Menu navigation
OK
To exit this menu at anytime, press [EXIT] button.
Channel
Auto Tuning - Allows you to retune the television for all digital
channels, digital radio stations and analogue channels.
ATV Manual Tuning - Allows you to manually tune your
analogue signal.
DTV Manual Tuning- Allows you to manually tune your digital
signal.
Programme Edit - Allows you to delete, skip and add favourite
channels.
Schedule List - Lists your programme reminders.
Signal Information - Information about DVB signal.
CI Information - Pay per view services require a "smartcard" to
be inserted into the TV. If you subscribe to a pay per view service
the provider will issue you with a 'CAM' and a "smartcard". The
CAM can then be inserted into the COMMON INTERFACE PORT
(CI Card In).
Dish Setup* - This menu is only available in DVB-S2 mode. You
can select the type of satellite, your transponder and your LNB
type, etc.
* - Only for models with DVB-S tuner
26
To access this menu, press
[MENU] button on the remote
control. To enter a menu press
[OK]
If you wish to make changes to
any of the default settings, use
the scroll
buttons.
(▲/▼/◄/►)
To confi rm any settings press
[OK] button.
Picture
Picture Mode - Choose from the following presets.
Standard
Default settings
Dynamic
Recommended settings for fast moving pictures
Mild
Set to be lighter in colour and less bright
Personal
Lets you manually alter all the settings
Ecohome
Consume 15% less energy.
Contrast - Switch the balance between black and white.
Brightness - Increase or decrease the brightness of the picture.
Colour - Increases the colour from black and white.
Tint - Lets you increase or decrease the level of tint within the
picture.
Sharpness - Increase or decrease the sharpness of the picture.
Colour Temperature - Choose from the following presets.
Normal
Default settings
Warm
Increases red within the picture
Cold
Increases blue within the picturew
Noise Reduction - Choose from the following presets.
Off
Turns noise reduction off
Low
Minor system adjustment
Middle
Medium system adjustments
High
Maximum system adjustments
Default
Default settings