Setting Into Operation - JTS UB-900I Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3 Important Notes
The amplifier corresponds to all relevant directives
of the EU and is therefore marked with
The amplifier is suitable for indoor use only
Protect it against dripping water, splash water
and high air humidity The admissible ambient
temperature range is 0 – 40 °C
For cleaning only use a dry, soft cloth; never use
water or chemicals
No guarantee claims for the amplifier and no
liability for any resulting personal damage or
material damage will be accepted if the am-
plifier is used for other purposes than originally
intended, or if it is not correctly mounted or
connected
If the amplifier is to be put out of operation
definitively, take it to a local recycling plant
for a disposal which is not harmful to the
environment

4 Setting into Operation

For mobile applications, the amplifier can be
mounted on any microphone stand with a 16 mm
(⅝") thread For fixed installation, a mounting
bracket is supplied which can also be screwed
to a rack
1) For a fixed installation, make a test run to de-
termine the best mounting location for the an-
tennas (see following steps) Then fasten the
supplied mounting bracket (5) at an adequate
location The distance to the second antenna
amplifier should be 0 5 m to 1 m The mini-
mum distance depends on the local reception
conditions
Use the mounting screw (6) to fasten the
antenna amplifier with its threaded hole (3) to
the mounting bracket
2) Connect the antenna of the receiver to the jack
ANT (4) and place it in a vertical position
3) Use a 50 Ω coaxial cable (e g RTF-1, 1 6 m) to
connect the jack OUTPUT (2) to an antenna
input of the receiver or of the antenna splitter
UA-960
4) Switch on the receiver or antenna splitter With
a correct connection, the red power LED (1)
will light up
5 Specifications
Frequency range:
Gain:
Power supply:
Ambient temperature: 0 – 40 °C
Dimensions:
Weight:
Connections:
Subject to technical modification
All rights reserved by MONACOR
Co KG No part of this instruction manual may be reproduced
in any form or by any means for any commercial use
470 – 870 MHz
10 dB
8 – 12 V⎓ from receiver or
antenna splitter
77 × 18 × 76 mm
140 g
2 × BNC
INTERNATIONAL GmbH &
®
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

15.0830

Table des Matières