Ebode ALDS58 Guide Utilisateur page 5

Example 1
The receiver can also be placed as shown in example 2. In this case, no line of sight exists
and the operating range is reduced.
Example 2
You can mount the receiver vertically by using the 2 screw openings at the bottom of the
receiver. If the receiver is mounted vertically, the operating range is reduced compared to
mounting the receiver right side up.
The receiver incorporates a directional antenna which prefers signals transmitted toward
the front of the receiver. Therefore, the front of the receiver should always be facing
toward the direction of the strongest transmitter signal. By properly orienting the receiver,
interference from other signal sources can be minimized.
We suggest that you experiment with placement in order to find the best location for the
transmitter and receivers.
Note: This product will not work properly from within an enclosed metal cabinet.
25-3-2013 5 ebode ALDS58