Introduction; Contents Of The Kit; Technical Specifications - Ebode ALDS58 Guide Utilisateur

Thank you for purchasing this ebode product.

2. Introduction

Make your speakers wireless with the ALDS58 and eliminate long speaker cables to your
rear speakers. The wireless amplifier receives a 5.8GHz signal which is transmitted in a
digital format up to 30 meters away from the transmitter. Wireless Digital Audio at full CD
quality due to uncompressed technique. Volume can be adjusted with your existing remote
and on both transmitter and receiver to guarantee a perfect sound between your front and
rear speaker. Stereo Amplifier with 2x40 Watts RMS Output power per channel.

3. Contents of the kit

 1x 5.8 GHz Digital Audio transmitter,
 1x 5.8 GHz Digital Audio receiver,
 1x 9V DC 300mA Power Supply
 1x 24V DC 1500mA Power Supply
 2x short speaker cables.

4. Technical Specifications

Transmitter:
 Audio transmission method: Digital
 Transmitter frequency: 5.8 GHz
 Error correction: 1/2 rate FEC
 Audio sampling method: 128 times oversampling
 Transmitted data rate: >3 Mbps
 Transmitter operating range:
max. 100 ft. line of sight, max. 30 ft. through walls and ceilings
Receiver:
 Output power: 2 * 18 W (RMS)
 Frequency response: 2 Hz ... 20 kHz
 Signal-to-noise ratio: 91 dB (Transmitter / Receiver, A-weighted)
 Total harmonic distortion: typ. 0.04 % @ 20 W
 Overall audio latency: < 1 ms
 Power efficiency: 90 %
 Channel separation: typ. 75 dB
 Automatic receiver power down feature
25-3-2013 3 ebode ALDS58