Technical Data - Marmitek MEGACAM1 Guide Utilisateur

4. There is a MINI DIN plug at the end of the cable. This plug can be connected to the
extension cable included using an RCA plug for the audio and video signal and has a
connection for the power adapter. Use the RCA plugs to connect the audio and video
signal to e.g. the A/V In of your TV. Connect the yellow plug on the jack VIDEO and the
white plug on the jack AUDIO LEFT. If your device has a scart connector, you may use the
scart adapter provided. Ensure that the plug and socket colours match each other. Then
connect the power adapter. Set your TV to the A/V channel (number 0 or the AV/Scart
button on your remote control).
5. PROBLEM SHOOTING:
No image:
a. Check whether the camera is powered by the adapter included. Check whether the wall
socket is actually working.
b. Check whether the TV or monitor is turned on and set to the A/V channel (A/V or channel 0)
c. If the camera is connected to the PC, check if the connection is a composite Video In.
No sound:
Connect the white plug to the white connection of the Scart adapter (left channel and
Mono). If you have no sound, you can connect the white plug to the red connection of the
Scart adapter (right channel).

6. TECHNICAL DATA:

Camera element:
Min. Illumination:
Sound:
Operational temperature: -10º / +40º C
IP value:
Power:
Dimensions:
MEGACAM 1
TM
1/3" CMOS Colour, PAL, 64º lens
3 Lux
Built-in microphone
IP44, for outside mounting in a sheltered place
12 VDC, 500mA, 230VAC/50Hz Power Adapter
130x60x72 mm
ENGLISH
5