Staba MG 500 Mode D'emploi page 11

Assembly
- Do not plug in the device.
- Place the stainless steel bowl on the motor part.
- To assemble the blades, place the upper blades (no. 4) on the lower blade shaft (no.
5) and fix it with a rotary move (no. 6).
- Place the blade set in the bowl.
- Insert the scraping rotator (no. 3).
- Place the lid on the bowl and loch it with a turn to the right.
- Plug in the device. Do not let the device work with an empty bowl.
1. Lid
2. Silicon ring
3. Scraper
4. Upper blades
5. Blade shaft
6. Connection of upper
and lower blade
7. Lower blade
8. Stainless steel bowl
9. Microswitch
10. Button
11. Motor part
12. Non-slip rubber feet
13. Scraping rotator
11