Loading Battery; Insert Battery; Turn The Power Switch On - Carson E-Crasher Brushless CE-10 T Mode D'emploi

d. Loading Battery
Beware:
Only use the specially provided charger units to charge the nickel
metal hydride batteries.
Otherwise your drive battery could be damaged. We recommend the
CARSON plug-in charger "Turbo 6", N
GB
The charging time will vary according to the charger unit and battery
type.
e. Insert Battery
1 Insert the battery.
2 Put the battery plate on it and
3 Fix it with the hook pins.
Advice
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before
being charged.
• Rechargeable batteries are only to be charged under adult
supervision.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Regular examination of transformer or battery charger for any
damage to their cord, plug, enclosure and other parts.
f. Turn the Power Switch on
• Pull the transmitter antenna out completely.
The range of the remote control is reduced if the antenna is not
pulled out completely.
18 CARSON CE-10T Brushless E-Crasher
o 50 060 6030.