Door Reversal - Silhouette Select SSWC056D1B Guide D'utilisation

Operating Instructions

DOOR REVERSAL

Fig 1A
Fig 1C
Fig 1E
1. Bottom Hinge (Right)
2. Screws
3. Door Axis
4. Screws
5. Mechanical Switch
6. Top Hinge (Right)
7. Screws
8. Top Hinge (Left)
9. Plug
10. Bottom Hinge (Left)
1. Open the door to a 90° angle, take out 2 screws from the lower door axis (3), remove the door (refer to Fig. 1A), then
pull out the door and door axis (Fig. 1A).
2. Put the door safely down, unscrew 2 screws (4) at the bottom and remove the machanical switch (5), then install (5)
at the top of the door frame (Fig 1A and 1B).
3. Take out 3 screws (7) from the top hinge (right) (6) and remove the right top hinge (Fig. 1C).
4. Remove the plug (9) from the top left of the cabinet and install the spare top hinge (left) (8) at the top left of the cabi-
net with 3 screws (Fig. 1D).
5. According to the above procedure, install the spare lower hinge (left) (10) onto the lower left cabinet (Fig. 1E).
6. Once the door has been moved, install the door the same way that it was removed and ensure the door is properly
aligned.
7. Block the hole at the top right of the cabinet with the spare plug.
Please note: Do not lay the unit on its back.
Fig 1B
Fig 1D
Fig 1F
9