Stand-Alone Version; Starting; Working Modes Definition; Manual Mode Comfort - Wagan Tech BT-TH02 RF Manuel D'utilisation

STEP 3
Fix the 2 screws on
the brackets
3

Stand-alone version

3.1

Starting

The thermostatic head is now ready to work.
The default working mode will be automatic
standard built-in program "P1".
Monday to Friday (week)
19°C
17°C
7:00 9:00
Saturday & Sunday (week end)
19°C
17°C
8:00
Note:
You can customise your program as you want, See the
next part "Working mode definition" chapter "Program"
for more explanations.
Program
Setting View
Current position (blink)
(comfort one)
At any time, when the backlight is off, press any key
to light-up the backlight, and then press another time the
(OK) key to switch the view between the setting
temperature and the time values.
3.2

Working modes definition

Following your installation (Unit installed) your
thermostatic head will offer different possibilities.
Your thermostatic head has several working modes to
allow you to adjust your unit according to your life habits.
How to change the working mode?
-Press any keys to switch on the backlight.
STEP 4
Push the ( ) key to finish
(Clos)
with a
17:00 23:00
23:00
Clock View
-You can now press LEFT (◄) or RIGHT (►) key to
display the working mode choice menu.
Move the frame cursor on the desired working mode and
press ( ) key to enter in the operating mode you have
chosen.
3.2.1

Manual mode Comfort

Manual working mode, the comfort setting temperature
will be followed all the time.
By pressing LESS (-) or MORE (+) keys, the comfort
setting temperature starts to blink and can be adjusted.
3.2.2

Manual mode, Reduced

Manual working mode, the reduced setting temperature
will be followed all the time.
By pressing LESS (-) or MORE (+) keys, the reduced
setting temperature starts to blink and can be adjusted.
3.2.3

Manual mode, Anti-Freeze

Pressing LESS (-) or MORE (+) keys, the anti-freeze
setting temperature starts to blink and can be adjusted.
3.2.4

OFF mode

Be Careful: In this mode your installation can freeze.
Program
Use this mode if you need to switch off your installation.
Only the Time is viewed during this mode.
To restart your installation, use the navigation keys
LEFT (◄) or RIGHT (►).
3.2.5

Automatic mode

In this mode the thermostatic head will follow the chosen
program (Built-in
actual time and the Comfort and Reduced setting
temperatures.
3.2.6

Program mode

Current day
Program of the day
4
P U
or customized ) according to the
Program used
(blink)