Playing Back Music In Mp3 Format; Cleaning And Maintenance; Technical Data; Meaning Of The "Dustbin" Symbol - AEG SR 4322 CD/MP3 Mode D'emploi

English
50
3. Select the next track with the SKIP+/SKIP- key and
press the PROG(RAM) key again. Repeat the procedu-
re until all the desired tracks are selected.
4. Press the II PLAY/PAUSE key (20/1). The playback
starts. The fi rst track number selected appears in the
display and or
this button to pause briefl y the playback.
5. Press once the STOP key to stop the playback while
retaining the program.
6. To play the programme back again, press the
II PLAY/PAUSE button.
7. In order to delete the programme, fi rst press the
PROG(RAM) button in stop mode and then the STOP
button. The PROG control lamp goes out.
The device stops automatically once the entire sequence
of programmed tracks is completed. The abbreviation
PROG goes off and the programmed order of tracks is
deleted from the memory.
It is also possible to combine the programmed tracks
with the REPEAT function. After you have programmed
and started the device, please press the MODE button
(17/6) up to three times and then you can use the func-
tions as described under MODE".

Playing back Music in MP3 Format

With this device it is possible to play back pieces of mu-
sic in MP3 format. The device also supports all standard
CD types: CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machi-
ne detects an MP3 CD automatically (the total number
of tracks and MP3s appears in the display). If you would
like to play one of these CDs, proceed as described under
„Playing CDs/MP3". Tracks can be programmed as descri-
bed under „Playing Back Programmed Tracks".
Please note:
There are a number of diff erent recording and compres-
sion methods, as well as quality diff erences between CDs
and self-recorded CDs.
Furthermore, the music industry does not adhere to fi xed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is
not a malfunction of the device.

Cleaning and Maintenance

• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a
slightly damp cloth without any additives.
05-SR 4322 CD_MP3_AEG.indd 50 05-SR 4322 CD_MP3_AEG.indd 50
MP3 and PROG. light up. Press
Troubleshooting
Symptoms Course
CD can not be CD is not inserted
played back. or inserted incor-
rectly.
Batteries too
weak.
CD jumps during Check the disc
playback. for fi ngerprints,
dirt or scratches.
Memory card A USB storage
does not play medium is
back or cannot be connected at the
selected. same time.

Technical Data

Model: ................................................................ SR 4322 CD/MP3
Power supply: ............................................................. 230 V, 50 Hz
Battery operation: .............................6 x 1,5 V, Type UM2/R14
Power consumption:...............................................................18 W
Protection class: .............................................................................. ΙΙ
Net weight: .............................................................................. 2,0 kg
Radio section:
Frequency ranges: ................VHF / FM 87,5 ~ 108,0 MHz
..................MW / AM 530 ~ 1640 kHz
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!

Meaning of the "Dustbin" Symbol

Protect our environment: do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will no lon-
ger use to the collection points provided for their disposal.
This helps avoid the potential eff ects of incorrect dispo-
sal on the environment and human health.
This will contribute to the recycling and other forms of
reutilisation of electrical and electronic equipment.
Information concerning where the equipment can be
disposed of can be obtained from your local authority.
Solution
Ensure that the
disc is inserted
with the label
facing upwards.
Insert new bat-
teries or operate
the device with
the mains lead.
Check the disc
for fi ngerprints,
dirt or scratches.
Remove the USB
storage medium.
09.09.2008 16:39:23 Uhr 09.09.2008 16:39:23 Uhr