Key Function; Setting Mode - Perel WC224 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
Following is a table of barrier vs. reception factor as a guide.
6.
Settings
6.1
TEMP.
WIND +
PRESSURE -
ALARM
MAX/MIN
LIGHT/SNOOZE
Notes:
Press WIND + and PRESSURE – simultaneously to reset the weather station and
clear all records. All user settings will return to default.
Press TEMP. to skip the RF signal reception.
In setting mode, press WIND + or PRESSURE – to set the value.
Press LIGHT/SNOOZE or wait 30 seconds to exit the setting mode.
6.2
Hold SET pressed for 2 seconds to enter the setting mode. The basic settings can now
be performed in following order.
Beep
Press WIND + or PRESSURE – to select on (beep at every key press) or off (beep off).
V. 02 – 04/06/2020
Barrier
glass
plastics
wood
brick
concrete
metal

Key Function

Key
SET
Hold this key to enter the setting mode.
Press this key to view wind chill, heat index and dew point
temperature.
Press this key to view rain rate, event, rain day, rain week, rain
month and rain total.
RAIN
Hold this key pressed for 2 seconds to reset the current
displayed rain value.
Press this key to view wind/gust and wind direction.
Press this key to view the absolute pressure average of 12 h,
24 h, 48 h and 72 h.
Hold this key pressed for 2 seconds to view the absolute and
relative pressure.
Press this key to view the alarm value of temperature/humidity/
rain rate/rain day/wind.
Press this key to view the max/min value of temperature/
humidity/rain rate/rain day/wind/UVI/light/absolute pressure.
Press this key to adjust the LCD brightness.
Hold this key pressed to register a new transmitter.

Setting Mode

WC224
Description
7
Signal Reduction
5-15 %
10-15 %
10-40 %
10-40 %
40-80 %
90-100 %
©Velleman nv

Publicité

Chapitres

Table des Matières
loading

Table des Matières