Jung eNet Instructions D'utilisation page 5

eNet
eNet enjoliveur de volet roulant avec récepteur radio
Manual commissioning
Operating mode
Local Operation
Behaviour on voltage return
Configured venetian blind po-
sition
Configured slat position
Manual saving of the scene
values
Behaviour after the end of the
disabling function
Priority, lock-out protection
Priority, restraint
Priority, wind alarm
32582613
J0082582613
On, Off
Basic setting: On
Roller shutter
Venetian blind
Awning
Basic setting: Roller shutter
On, Off
Basic setting: On
No change
Configured value
Basic setting: No change
0 ... 100 %
Basic setting: 0 %
0 ... 100 %
Basic setting: 0 %
On, Off
Basic setting: On
no change
Last value
Down
up
Basic setting: No change
0...4
Basic setting: 1
0...4
Basic setting: 2
0...4
Basic setting: 3
5/7
Blocks manual commissioning
for the device channel. In the
"Off" setting, the device can-
not be reset to the factory set-
ting.
Roller shutter
A rolling shutter or an awning
is controlled for which the Fa-
bric stretching function is re-
quired.
Venetian blind
A Venetian blind is controlled.
Awning
An awning is controlled for
which the Fabric stretching
function is required.
Blocks the output for operation
using the button.
Defines the behaviour of the
output after voltage return.
RMD design: Bus voltage re-
turn
If the value "Configured posi-
tion" is entered for the para-
meter "Behaviour after voltage
return", then the blind/shutter
position set here is approa-
ched.
If the value "Configured posi-
tion" is entered for the para-
meter "Behaviour after voltage
return", then the slat position
set here is approached.
Disables the saving of the cur-
rent Venetian blind position as
scene value in an actuator for
a command via a transmitter.
Behaviour of the output when
a block is removed.
Specifies the priority for recal-
ling and removing a scene of
type Lock-out protection for
the channel.
Specifies the priority for recal-
ling and removing a scene of
type Restraint for the channel.
Specifies the priority for recal-
ling and removing a scene of
type Wind alarm for the chan-
nel.
15.07.2016