Publicité
Les langues disponibles
Les langues disponibles
Mute Groups
Normally, when you strike a trigger when another sample is playing back, the samples of these two triggers will be
played back overlapped. With the mute group function, you can stop the playback of the sample of a trigger when you
strike another trigger. For example, you can simulate a hi-hat by setting an open hi-hat sound to one trigger, and then
setting a closed hi-hat sound to another trigger. Then after setting both triggers to the same mute group, these
sounds will mute each other out, similar to a real hi-hat.
To assign a trigger to a mute group:
1.
Strike one of the triggers that you want to assign to a Mute Group.
2.
Move the cursor to the MGRP (Mute Group) area by pressing the Cursor Up or Cursor Down buttons and use
the Cursor Left or Cursor Right buttons to select a Mute group. [1-16]
3.
Strike another trigger, navigate to the MGRP, and use the Cursor Left or Cursor Right buttons to set this
trigger to the same number you set for the first trigger.
Options Menu
SampleRack's Options menu contains global settings that
affect the overall operation as well as system-related
information and functions.
To enter the Options menu and change these global
settings:
1.
Press and hold the Cursor Up and Cursor Left
buttons for 2 seconds to enter the main Options menu.
2.
Press the Cursor Up and Cursor Down buttons to highlight the submenu that you would like to enter, then
press Cursor Right to enter the submenu.
3.
Press Cursor Up and Cursor Down to highlight the parameter that you would like to enter, then press Cursor
Left and Cursor Right to edit the parameter.
4.
To exit a submenu or the main Options menu, press and hold Cursor Up and Cursor Left for 2 seconds.
To save the global parameters set in the Options menu:
1.
Press and hold the Cursor Down and Cursor Right
buttons for 2 seconds to enter the main Save menu.
2.
Press the Cursor Up and Cursor Down buttons to
highlight SAVE GLOBAL SETTINGS.
3.
Press Cursor Right to enter the SAVE GLOBAL
SETTINGS submenu.
4.
Press the Cursor Up and Cursor Down buttons to highlight YES and press Cursor Right to save the global
settings.
5.
To exit the SAVE GLOBAL SETTINGS submenu, press the Cursor Down until Exit is highlighted, and then
press the Cursor Right button. Alternatively, press and hold the Cursor Down and Cursor Right buttons to
exit this menu.
Metronome
• Switch: Turns the metronome on or off.
• Sound: Selects the sound of the metronome from
Voice, Metronome, Claves, Sticks, Cowbell, and
Beep.
• Tempo: Adjusts the tempo of the metronome from
30-280 BPM (Beats per Minute).
• Level: Adjusts the volume of the metronome from 0-
10.
• Time: Adjusts the time signature for the metronome. The available time signatures to select from are 1/2, 1/4,
1/8, 1/16, 2/2, 2/4, 2/8, 2/16, 3/2, 3/4, 3/8, 3/16, 4/2, 4/4, 4/8, 4/16, 5/2, 5/4, 5/8, 5/16, 6/2, 6/4, 6/8, 6/16, 7/2,
7/4, 7/8, 7/16, 8/2, 8/4, 8/8, 8/16, 9/2, 9/4, 9/8, and 9/16.
8
Publicité
