Haco 4552700H Mode D'emploi page 13

EN - RADIO REMOTE CONTROL
Contents
1. Introduction
2. Installation
3. Use
4. Safety
5. Technical data
6. Wiring diagram
7. CE certification
8. Connection diagrams for tail lifts
1. Introduction
HACO Tail Lift Parts has developed its radio remote control specifically for operating tail
lifts on lorries. The controls' settings and in-built safety features have been designed to
ensure safe operation of the tail lift.
BEWARE! The owner of the vehicle is at all times responsible for an object that
has been installed on the vehicle.
2. Installation
The receiver can be installed safely using the self-drilling screws delivered with the
product. The receiver must be connected according to the wiring diagram. Always have a
certified mechanic take care of installation. Just like for other controls, HACO Tail Lift Parts
supplies cable sets with circuit diagrams that are specific to this product.
BEWARE! To ensure your safety and the safety of others, the system must be
connected to a power supply that automatically switches off when the lorry is
starting up and driving.
Manual 13