Product Description; Designated Use; Technical Data - erba 33229 Mode D'emploi

GB - INSTRUCTION MANUAL

2. PRODUCT DESCRIPTION

1 - Chuck
2 - Auxillary handle
3 - Switch impactdrill / chisel
4 - Powerswitch
5 - Grease access

3. DESIGNATED USE

The rotary hammer is for drilling and chiseling with high force. Any other use is prohbited. The buyer
accepts all liabilities, legal and otherwise, for any damage or injury resulting from improper use of
the product (i.e. any other use than the above stated designated use).
4. RESTRICTIONS
Please note, that this product is not designed for commercial or industrial use. We accept no liability
or warranty claims should the product be used in industrial and/or commercial operations.

5. TECHNICAL DATA

Output:
Rated power:
Impact rate:
Impact force:
No load speed:
Max. drill diameter concrete:
Max. drill diameter steel:
Weight:
Protection class:
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
1250 W Vibration on handle:
230V ~50Hz
Impcat drill (concrete):
2600/min.
Chisel:
4,5 J
800 U/min.
Noise emission values:
32 mm Sound pressure level L(pa):
13 mm
Sound pressure level L(wa):
5,9 kg
II
Page 12
18,513 m/s ± 1,5 m/s
2
16,059 m/s ± 1,5 m/s
2
94,9 dB (A) ± 3 dB
105,9 dB (A) ± 3 dB
Instruction manual
Issue: 02/2017
Changes, print, punctuation and other errors reserved!
2
2
33229