LENCO TAB-701 Mode D'emploi page 6

CONNECTING TO THE INTERNET
www
First of all, you need to configure a WiFi network. For this procedure to work, you need to be in a WiFi zone that will
allow you to connect to it. Every time the TAB-701 is in range of a network that you have already configured once, it will
attempt to make a connection.
To configure a new WiFi network, go on the Home screen, tap on the Menu icon To configure a new WiFi network, go on the Home screen, tap on the Menu icon
1
Settings
select
2
Settings
In the screen, select
If the WiFi is off, tap on the
3
will scan for available WiFi networks and display them at the bottom of the screen.
Tap on the network you want to connect to, enter the required network information* and then tap on
4
TAB-701 will now attempt to establish a connection to that WiFi hot spot with the network parameters you entered.
* For free access WiFi points, there is no need to enter any special information. For secured networks, you will need either a key (a series of numbers and/or letters)
of the type WEP, WPA, or WPA2. Check with the person who manages the WiFi network to obtain the exact connection parameters required.
6
.
Wireless controls
.
Wi-Fi
line to turn it on. Then select
, then
Wi-Fi settings
. The TAB-701
Connect
. Your