Publicité
Les langues disponibles
Les langues disponibles
IENGLISH
1.)
Before starting, please read ourassembling
thern,
2.) rollow our àssemblirig instructions careflJlly.
3.) Compare the listed parts and fitting Iîst to the contents of the cardboard.
4.)firepare
the necessarytools
Bad tools lead in sorne Way to difficultles durîng the assembling.
5.) Tc tnakesure fhot thefumiture
adequatearea
and COvér the floor with the cardboards
,6.t
Werecommend
,7.) Do ndt overwind screWs. Ched
,aS
Keep the'instruction
For woodenfurnifure
Wooden Furniture: Stains con be taken off with a soft, moistened cloth or by usihg a special polish
".'
".
"
,
(avcilable'insupermarket
and soft cloth ofterwards..
Steel fu;niture:
The metal has a varnished surfoce. The molenol Could show mtle discrepancies
stains due to thé mOchinemade
lhome
metal pOrts have beentwistedout
them into the original position. Pieose
MDr cnd coatèd
sutfaces,:
MDF consists of waaden
this could cause damâge
Thatshould not be a (easan forcotnpiaints
Due fo machine mède production.
wÎth a fine standard sand paper. Please do it carefully in order to make sure that you will not remove
too much of fhe Material.
Corrying ouf theossembly
Childreh rnight také stnall ports or fittlh~s awcy or' swaUow fhem up. During assembling it could also
happen that ports ,of your fljmiturefall
,Please, therefore.protecf
If your piece offumiture
bredk at dny time
èl;ld
special c10thing and safety shoes. aval/able in.the supermarkets and specializedstores.
We are not liable for cny material damoge
we are also not liÇjble for ony damage
(Le. retightening
ofsëfews, cnd etc''').
use against its purpose.
We wish you a lot ofjoy and pleasure with yournew
YourQuality
AssuranCe'Team bylntèr'LlnkSAS
ImportgntauêrnbÎlna
for assembling ondmake
will not be damoged
operating
always with two or more people.
the scrèWSfrom time to timé and if necessary retight them.
ondserviéesheefs.
Perhaps you will need them later on.
Maintenance
consisting of glass and steel or MDF and coated
and spedalizedstores).
production
of shope duringtransport,
do
notoverwind
fibrés. Do not work on the coated surfaces with knives or sharp objects.as
the, matèrlal.
afterwardS. ,
fhe MDF ports can have sharp edges. You could chamfer them
is
for aoults only. Please, keep your children away ouring assembling.
downon
'them and maKe sure thQt you carry out the assembling in their absence.
consists of glass, it should be handled carefully during assembling. Glass can
couse injuries. Therèfore. you shoLild profect
or injuries resUlting trom foulty assembling.
resultant frotn locK of maintenance
Weare not liable for èny damage
suggestions:
instructions'carefully
and make yourselffamiliar
sure that the tools are in proper condition.
or grated during assembling, prepare an
or another soft pad {Le. cloth orcarpet}.
advice:
surface:
But do not forget to wipe the surface with a dry
which shOuld not be c reaSon for a complaint.
You could carefully try to twist
the screws and retight thetn from time to time.
waming:
your children.
your eyes and hands by wearing
piece of furniture.
3
with
in coJour. clouds or
'
during use.
caused by faulty use or
Publicité
