After Care; Cleaning And Maintenance - Spellbinders PRIZM Mode D'emploi

English
Building a Sandwich
ALL Sandwiches should be stacked in the correct order. Attempting
to use incorrect plates may cause damage to the machine. Please
ensure the combinations of plates are correct. To ensure the best
results, experiment with a scrap piece of paper first.
CUTTING SANDWICH
1. A-Base Plate (white)
2. Shaped die template with cut ridges up.
Fig. 3
3. Paper, cardstock, craft foil, etc.
4. C-Cutting Plate (grey)
5. Run through the Prizm
EMBOSSING SANDWICH
1. A-Base Plate (white)
2. Shaped die template (cut ridges up) with cut shape inside
3. Tan Embossing Mat
4. B-Embossing Plate (blue)
5. Run through the Prizm Machine
Fig. 4
3
- (Stack from bottom up. See fig. 3.)
Machine
™
- (Stack from bottom up. See fig. 4.)

After Care

1. Fold up the tray on both sides of your Prizm
2. After using the machine, turn the white lever counter-clockwise
to release the machine from the surface. See fig. 6.
3. Store in a suitable safe place, out of reach of children.

Cleaning and Maintenance

Clean the Spellbinders
Fig. 5
slightly damp cloth only. Do not use a cleaning product
or chemical cleaners on the machine. Canned air may be used
to remove dust and debris from small areas of the machine.
If your Prizm handle requires lubrication, you can remedy
this quickly and easily. Place a small drop of household dish
detergent between the white and blue parts of the handle and
rotate the handle to distribute. Alternately, you can remove and
immerse the handle into clean water with dish detergent.
Fig. 6
Do not use chemicals such as WD-40.
To prolong the life of the plates, use both sides and remove any scrap materials after cutting.
English
Machine. See fig. 5.
™
Prizm Machine and its accessories with a
®
4