Table Des Matières - Astralpool ECO ELECTRICHEAT Manuel Technique

ECO ELECTRICHEAT
TABLE OF CONTENTS
1 INTRODUCTION .......................................... p.3
2 PRODUCT DESCRIPTION .......................... p.4
3 INSTALLATION ............................................ p.4
3.1 POSITIONING ......................................... p.4
3.2 PIPING DETAILS .................................... p.4
3.3 ELECTRICAL CONNECTION ................. p.4
3.4 POWER REQUIREMENTS .................... p.5
3.5 ELECTRICAL DIAGRAM ........................ p.5
1 INTRODUCTION
Thank you for purchasing the new ECO® Electric heat exchanger. The experience our company
gas gained over more than 25 years in the world of pool conditioning has been put to your service
in this product.
INFORMATION
Please, read this manual carefully to ensure that your new heater will give you years
of trouble free service. Remember that incorrect installation will affect your warranty.
Do not discard this manual, please, keep it for future reference.
It is recommended to take note of the following data:
INSTALLER COMPANY:
INSTALLER TELEPHONE:
INSTALLATION DATE:
HEATER MODEL:
HEATER SERIAL NUMBER:
DEALER'S STAMP
WARNING
This heater must be installed in a dry weatherproof enclosure.
Operating temperature range: +5ºC to +45ºC
Max operating Humidity: 90% without condensation.
If the heater is not used for a long period of time (winter), it must be drained to
prevent damage.
© ASTRALPOOL 2019 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT
3.6 FLOW REQUIREMENTS ................................ p.5
3.7 WATER QUALITY REQUIREMENTS ............. p.5
3.8 CHANGING DEFAULT FLOW DIRECTION ... p.5
4 TROUBLESHOOTING ......................................... p.6
5 PRODUCT RECYCLING ..................................... p.7
6 WARRANTY CERTIFICATE ............................... p.7
INSTALLER'S STAMP
.
ENGLISH
Pg: 3