Care And Handling; Environmental Conditions; Safety Instructions - VWR International DMS-2500 Manuel D'instruction

C H
ARE AND ANDLING
The High Speed Micro Speed Shaker should be given the care normally required for any electrical appliance. Avoid wetting or unnecessary
exposure to fumes. The finish can be washed with water and soap or detergents, using a cloth or sponge.
E C
NVIRONMENTAL ONDITIONS
Non-Operating Storage:
Temperature: -20 to 65
Humidity: 20% to 85% RH, non-condensing
Operating Conditions: Indoor use only
Temperature: 10 to 40
Humidity: 20% to 85% RH, non-condensing
Altitude: 0 to 6,562 ft. (2000M) above sea level
Installation Category II and pollution degree 2 in accordance with IEC 664
S I
AFETY NSTRUCTIONS
Please read the entire instruction manual before operating the High Speed Micro Plate Shaker.
Caution
DO NOT lift your High Speed Micro Speed Shaker by the trays or they can be damaged. Top tray is removable. Only a qualified service
technician should remove bottom tray.
Caution
Unplug from power before cleaning. DO NOT immerse.
Caution
Do not use High Speed Micro Speed Shaker in a hazardous atmosphere or with hazardous materials for which the unit was not designed.
Also, the user should be aware that the protection provided by the equipment might be impaired if used with accessories not provided
or recommended by manufacturer, or used in a manner not specified by the manufacturer.
Caution
To completely cut off power to the unit, disconnect the power cord from unit or un-plug from the wall outlet.
o C (-4 to 149 o F)
o C (50 to 104 o F)
2