BST MX62BT-DSP Manuel D'utilisation page 3

IMPORTANT SAFETY INSTRUCTIONS
1. Read the manual prior to using this unit and keep it for future reference.
2. Adhere to all warnings and instructions marked on the unit and contained in the manual.
3. Don't place the unit close to water, e.g. in a bathroom, near a wash tub, a swimming pool, etc.
4. Do not place the unit on an unstable surface. Ensure the unit is placed on a secure table or stand to avoid risk of
damage or injury.
5. Keep away from heat sources such as radiator, stove and amplifier etc.
6. Operate the unit only with the supplied power supply.
7. Do not crush or squeeze the power cord.
8. Clean the unit with a soft cloth.
9. Unplug the power cord if the unit is not used for a long time or during a thunderstorm to prevent voltage surges
causing damage the internal circuitry.
10. Prevent objects and liquids entering into unit.
11. If one of the following happens, refer to qualified service personnel:
A) Power cord or plug is damaged; or
B) An object or liquid has entered into the unit; or
C) The unit has been exposed to rain ; or
D) The unit doesn't work; or
E) The unit has fallen or doesn't work normally.
12. Repair ---Do not attempt to repair the unit yourself. All repairs must be carried out by a qualified technician. The
user is only allowed to perform manipulations, settings and controls specified in this manual.
13. Ventilation --- Do not cover the ventilation openings to prevent overheating of the unit. Do not place the unit on
a bed, blanket, sofa or other similar soft surface. Do not place the unit inside a bookcase, a closed cupboard, etc.
14. Accessories---Do not use parts that are not recommended by the manufacturer in order to avoid damage.
15. Spare parts---If the unit requires spare parts, use only spares recommended by the manufacturer and that are in
all aspects identical to the original parts. .
16. Safety check---After repairing, repairer must test the unit for safety.
FEATURES
1. DC IN +12V
Connect the supplied mains adaptor to the DC IN 12V socket. The supplied mains adaptor delivers an output voltage
of 12Vdc 1A.
2. POWER: Press this switch to power the unit on.
3. USB TO PC: Use a USB A-USB B cable to connect the mixer to your computer for music playback.
4. BT ANT: Bluetooth antenna.
5. MIC/LINE: Microphone/line input. This input can deliver a voltage of +48V for a condenser microphone requiring
phantom power.
6. PHANTOM: Press to apply a voltage of +48V to this input. The red LED lights up.
©Copyright LOTRONIC 2017
GB
INSTRUCTIONS OF USE
MX62BT-DSP 3