Accessories; Component List - ADEO Services DEXTER POWER CDT219LD.N Manuel D'utilisation

EN
The use of the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration and noise accessories are used.
And the tool is being used as intended by its design and these instructions.
To reduce vibration and noise risk:
-Wear anti-vibration gloves
-Shorten trigger time
-Wear hearing protection
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Helping to minimise your vibration and noise exposure risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration and noise accessories.
Plan your work schedule to spread any high vibration tool use across a number of days.

ACCESSORIES

Li-Ion battery pack
Charger
Double ended bits
25mm PH2
25mm SL5.0
Belt clip
Chuck clip
We recommend that you purchase your accessories from the same store that sold you the tool. Use
good quality accessories marked with a well-known brand name. Choose the type according to the
work you intend to undertake. Refer to the accessory packaging for further details. Store personnel
can assist you and offer advice.

COMPONENT LIST

1. Detachable keyless chuck
2. Chuck release button
3. Torque adjustment ring
4. Two-speed gear control
5. Forward/Reverse rotation control
6. Soft grip handle
7. Belt clip
8. Battery pack
9. Battery pack release button
10. Chuck clip
11. On/off switch
12. Sight light
94
2
1
1
1
1
1
1