Ebode TAKE 10 Guide Utilisateur page 25

To delete a Favourite Channel Icon (TV station):
• Home/Setup/Favourites/Delete/Favourite Category (His, Hers, etc)/press Side Key next to
Favourite Icon you want to delete/Press OK/Select Yes.
To Clear an Entire Category of Channel Favourites:
• Home/Setup/More/Advanced/Clear Settings/Favourites/ Favourite Category you want to
clear (His, Hers, etc)/Press Clear key.
To Clear an Entire Room of X10 Favourites:
• Home/Setup/More/Advanced/Clear Settings/More/Clear X10/Room category you want to
clear (Living Room, Kitchen, etc)/Press Clear key.
Also, if the default names are not in accordance with what you want, please note that you
can easily change these names by selecting Home/Setup/Favourites/Rename or
Home/Setup/X10/More/Rename.
Audio and Video Compatibility
The TAKE 10 used in conjunction with the Powermid receiver gives you control of Audio and
Video components - even if they are in a different room from the remote.
The Powermid receiver allows you to extend the distance you can use your remote. You will
be able to hide the Powermid receiver from sight and still control your TV or other electronic
devices through entertainment centres, cabinet doors, from another room, etc.
The transmitter will receive the RF commands and send them using IR through the transmitter
cable included with your package.
Description:
Follow these basic steps:
• Plug the Powermid Receiver into the AC outlet in the room where your TV, VCR, stereo, etc.,
that you want to control are located (up to 20 feet away from what you want to control).
Point the front of the Powermid Receiver
towards the unit you want to control.
• Fully extend the antenna on the Powermid.
• (Optionally) plug the IR extender cable into the back of the Powermid receiver and attach
the IR emitters on the cable to the front of up to two A/V devices that you want to control.
• Press any key on the remote. The Powermid receiver receives the Radio Frequency (RF)
signals and blasts the IR signals from its front face, or optionally through the Powermid
receiver emitter cable to control your IR compatible devices (TV, VCR, CD, etc.).
Note: You can add more Powermid receivers to control A/V equipment in more than one
room.
Voice Dialer Security Console
The TAKE 10 used in conjunction with the SC28/SC9100 security console gives you the ability to
control your home security directly from your remote.
Description:
To set up your remote for the SC28/SC9100 do the following:
• Press the Home key.
• Press the Setup Side Key.
• Press the X10 Side Key.
• Press the Add/Edit Side Key.
• Use the Side key to select the room that you want to associate the security device.
• At the "add an X10 device!" screen, press the OK key.
• Use the Side Key to Pick Device.
16-8-2010 25 033000=15090C