English - Pahlen Aqua-Mex Manuel D'utilisation

Aqua-Mex
Product description
Aqua-Mex is a heat exchanger available in two versions: AM – a heat exchanger in standard configuration, and AM-FE - a heat
exchanger equipped with an electronic control unit and circulation pump for the primary circuit.
All Aqua-Mex variants can be ordered with an interior coil of either titanium or stainless acid-resistant steel.
The titanium version (T) is intended for use in aggressive water conditions, salt water and in pools with a chlorinator.
The Aqua-Mex heat exchanger features straight-through flow and 2" connections, contributing to high flow and lower energy
consumption.
Technical specifications
Fully equipped Aqua-Mex FE
A complete heat exchanger with electronic
control of temperature and flow.
It features an electronic flow switch
that shuts off the heat exchanger if
water flow stops.
A high-quality circulation pump
drives the primary circuit.
Capacity: 40 or 70kW.
The Aqua-Mex FE is protected from dust and water as per protection
class IP44, for installation either indoors our outdoors.
Aqua-Mex FE is CE-approved.
Dimensions
Weight
Max primary circuit temperature
Max secondary circuit temperature
Minimum flow, secondary circuit
Pressure, primary circuit
Pressure, secondary circuit
Connection, primary circuit
Connection, secondary circuit
Ambient temp. during operation
Protection class
Voltage
Current rating
Power consumption
Performance, heat exchanger
Typ
40, FE40
40T
70
70T
100
100T
* The nominal heating output based on the temperature difference between incoming warm and cold medium (here 80-20=60°C).
L770xB140xH346 mm
FE 40T 8,4 kg
FE 40 9,1 kg
FE 70T 8,8 kg
FE 70 9,7 kg
90ºC
45ºC
90 litres/min
0,3 - 6 bar
max 4 bar
G1"
2" (63 mm)
+5 till +40 ºC
IP44
220-240V 1~N 50/60 Hz
0,5 A
96 W
Primary
l/min m /h mvp
3
20 1,2 0,6
20 1,2 0,4
30 1,8 1,6
30 1,8 1,4
40 2,4 2,6
40 2,4 2,3
9
Standard Aqua-Mex
A complete heat exchanger with connections to the
primary and secondary water circuits.
Capacity: 40, 70 or 100kW.
Dimensions
40, 40T, 70, 70T
100, 100T
Weight
Max primary circuit temp.
Max secondary circuit temp.
Min. flow, secondary circuit
Pressure, primary circuit
Pressure, secondary circuit
Connection, primary circuit
Connection, secondary circuit
Sekundary
l/min m /h H(m)
3
250 15
250 15
600 18
600 18
333 20
333 20

ENGLISH

L770xB137xH178 mm
L942xB137xH178 mm
40T 4,4 kg
40 5,1 kg
70T 4,8 kg
70 5,7 kg
100T 5,3 kg
100 7,4 kg
90ºC
45ºC
90 litres/min
max 6 bar
max 4 bar
G1"
2" (63 mm)
DT 60ºC *
kW
0,4 40
0,4 40
0,6 70
0,6 70
0,8 100
0,8 100