Weekly Activation Mode - Cepex CPC004 Instructions De Fonctionnement Et D'installation

PROGRAMING
Programing the start hour of the irrigation (in weekly activation mode)
In this operation it is possible to set for each program (A, B, C) up to 4 different start times a
day.
At each start time the first valve selected for the program will be activated and thereafter the
other valves will be opened in numbered sequence.
• Switch the selector to start-time mode. START I will appear on the display with the weekly
activation mode device –
• Press – – and the data on the display will flash.
• Set the desired start hour with the aid of
• Repeat the operation for programing START 2, 3, 4 II, III, IV if you so wish.
• To cancel a particular start, select it with the aid of the –
The hourly digits will flash. Press
Allocating the valves to a program and setting the duration of irrigation for each valve
– is identical for all modes of activation. See page 18
– and the word OFF or the last start hour that was entered.
– or – . (Notice the AM or PM signs).
– or – until the word OFF appears on the display.
– and press – .
1 6
EN