Functional Description; Name Of Parts; Specifications - Metabo HPT WR 16SE Mode D'emploi

FUNCTIONAL DESCRIPTION

NOTE:
The information contained in this Instruction Manual is designed to assist you in
the safe operation and maintenance of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first
read and understood all safety instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments
that differ from those on your own power tool.

NAME OF PARTS

High-Low Switch

SPECIFICATIONS

Motor
Power Source
Current
No-Load Speed
Impact rate
Capacities
Tightening Torque
Square Drive
Weight
Bumper
Anvil
Switch
High-Low Indicator
Lamp
Fig. 1
Single-Phase, Series Commutator Motor
Single-Phase, 120 V AC 60 Hz
3.9 A
1,100 1,300 1,400 1,600/min. (4 modes)
1,300 1,500 1,700 1,900/min. (4 modes)
15/32" – 5/8"(M12 – M16) (High tension bolt)
15/32" – 7/8"(M12 – M22) (Ordinary bolt)
Maximum 270 ft-lbs (360 N . m)
1/2" (12.7 mm)
5.5 lbs (2.5 kg)
Hammer
Case
Handle
Hook
English
7