Troubleshooting - Tangent Danmark Dab2go junior Mode D'emploi

Troubleshooting

Problem
No sound
Buttons a not working
FM: Static sound
DAB+: Burbling/
intermittent cut-out
Sound is distorted
Desired station not found
Display shows "No Service"
Display is blank
Time and date not setting
automatically
Solution
•
The station is not tuned in. Fine tune the station.
•
The volume is set to a low position. Increase the volume.
•
Headphones may be connected. Disconnect the headphones.
Turn off the unit and turn on again after a few seconds.
•
Signal reception is too low.Adjust the aerial or move the unit
to a stronger signal location.
•
Rescan stations.
The volume is too high. Adjust the volume control.
Weak signal. Use the manual tune function.
There is no DAB+ coverage in your area, or poor
reception.Adjust the position of the aerial,or move the unit to a
stronger signal location.
This may occur if the broadcaster changes the label of a
service or removes a lable while tuned.The unit will try to
retuned or perform a scan.
For the time and date to set automatically you need to turn on
the system and switch to DAB radio and let this scan.The date
and clock will update automatically.
8