Specifications; Functional Description; Setup & Operation - Haussmann Xpert PNT118-C Manuel De L'utilisateur

B
A
C

SPECIFICATIONS

This HAUSSMANN XPERT air-powered mini die grinder is ideal for light weld
breaking, grinding, porting, and polishing applications, and for smoothing sharp edges.
The throttle-lever features a "lock-off" mechanism for added safety. The durable,
lightweight composite housing design helps to reduce vibration. Exhaust is discharged
through the rear of the grinder.
Grinder capacity: 1/4" (6 mm)

No-load Speed: 25,000 RPM

Average Air Consumption: 3.3 CFM (94 L/min)

Operating Pressure: 90 PSI

Air Inlet Size: 1/4" (6 mm) NPT

Air Hose: 3/8" (10 mm) ID

ACCESSORIES
Tool Lubricating Oil

Wrenches

1/4" NPT male connector


FUNCTIONAL DESCRIPTION

Figure 1 names the major components of the HAUSSMANN XPERT
air-powered mini die grinder:
D
A. Trigger
B. Lock-off switch
C. Grinding collet/Chuck
D. Air Inlet
Fig.1
SETUP & OPERATION
BEFORE YOU START
Compatible Compressor & Air Tool - Guidelines for Proper Usage & Operation
Always ensure the use of appropriately matched air tools and compressors. Be sure
that the air compressor being used can supply the appropriate volume, pressure and
delivery rate of air to the tool(s) without running continuously. Using tools or
combinations of tools that together or separately require more than the air compressor
can deliver will reduce performance and could void the compressor or tool warranty.
1
2
1
17