Ec Declaration Of Conformity - Bresser National Geographic 9110500 Mode D'emploi

light showing the power is turned on. Your unit is self-calibrated and needs no further adjustment. Your
metal detector is ready to be used in the most sensitive detection setting.
To search for metal objects, swing the metal detector back and forth slowly while keeping the search
coil level and approx. 2 cm above the ground. When your metal detector locates a metal object it
will start to emit a tone. The more solid and louder the tone, the stronger the signal, which indicates
how close the object is to the coil. Your unit also has an signal light that will illuminate when the signal
strength is strong. By using both the signal light and the signal tone you will be able to discover many
amazing things just below ground.
Detachable LED light
Power the LED light unit on by pressing the light switch. With the light on, you will be able to work your
way into darker places to find your treasures. The light can also be handy early in the morning and into
the early evening.
Notes on Cleaning
• Before cleaning the device, disconnect it from the power supply (remove batteries)!
• Only use a dry cloth to clean the exterior of the device. To avoid damaging the electronics, do not
use any cleaning fluid.
• Protect the device from dust and moisture.
• Remove the batteries from the unit if it is not used for a longer time.

EC Declaration of Conformity

Bresser GmbH has issued a 'Declaration of Conformity' in accordance with applicable
guidelines and corresponding standards. This can be viewed any time upon request.
10
Correct
Correct
Wrong
Wrong