Alesis Crimson II Guide D'utilisation page 9

Masquer les pouces Voir aussi pour Crimson II:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Head-Rim Adj: The amount of crosstalk reduction between the head (center)
o
and rim of a drum pad. Higher values reduce the probability that the pad's rim
sound will be triggered when you play its head only and vice versa (due to the
force being transferred through the pad). Don't set this value too high, though! If
this value is too high, you may not be able to trigger its sound if you intentionally
play both the head and rim at the same time; it may be silenced because the
module incorrectly interprets the hit as crosstalk.
Threshold: The amount of force required to trigger the sound.
o
Xtalk: The amount of crosstalk reduction. Higher values reduce the probability
o
that the pad's sound will be triggered when you play another pad (due to the
force being transferred through a rack, through the floor, etc.). Don't set this
value too high, though! If this value is too high, you may not be able to trigger its
sound if you play another pad at the same time; it may be silenced because the
module incorrectly interprets the hit as crosstalk.
Curve: The velocity curve of the pad. This controls the relationship between the
o
amount of playing force and the volume level of the pad's sound.
Retrig Cancel: The required amount of time between successive hits of the pad
o
to produce the sound for both hits. If this setting is too high, some notes may
not trigger when you play faster or perform rolls. If this setting is too low, you
may trigger extra, undesired notes while playing normally.
MIDI Note: When the drum module's USB MIDI port or MIDI Out is connected to
o
a computer or external MIDI device, the pad will send this MIDI note to it. If you are
not using those connections, this setting will not affect the trigger or its sound.
Kick Drum
Snare Drum (Center) 38
Snare Rim
Tom 1 (Center)
Tom 1 (Rim)
Tom 2 (Center)
Tom 2 (Rim)
Splash Sens: The sensitivity of the hi-hat pedal to create a "splash" sound
o
rather than the usual "closed pedal" sound.
To edit the parameter's setting or value, use the dial or Left () and Right () buttons.
6. To save your changes, press Save. Otherwise, your changes will be lost when you power
off the drum module.
7. Press Exit to return to the previous page.
36
Tom 3 (Center)
Tom 3 (Rim)
40
Tom 4 (Center)
50
Tom 4 (Rim)
82
Ride Bow
47
Ride Edge
80
Ride Bell
43
Crash 1
75
Crash 1 (Edge)
41
Crash 2
73
Crash 2 (Edge)
51
Hi-Hat Open
59
Hi-Hat Closed
53
Hi-Hat Pedal
Hi-Hat Splash
49
49
57
57
8
8
22
23
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Command advanced

Table des Matières