Parts Description - Princess Multi AeroCooker Mode D'emploi

• To protect yourself against an electric shock,
do not immerse the cord, plug or appliance
in the water or any other liquid.
• Do not heat the food for too long.
• The heating element surface is subject to
residual heat after use.
• The connector must be removed before the
appliance will be cleaned, please make sure
the inlet is completely dry before the unit will
be used again.
• The pressure container must not be opened
until the pressure has decreased sufficiently
and during use.
• Surface is liable to get hot during
use.
• WARNING: If the surface is cracked, switch
off the appliance to avoid the possibility of
an electric shock.
• The temperature of accessible surfaces may
be high when the appliance is operating.
• The appliance is not intended to be operated
by means of an external timer or a separate
remote-control system.
• The appliance is to be connected to a
socket-outlet having an earthed contact (for
class I appliances).
• In order to prevent disruptions of the airflow
do not put anything on top of the appliance
and make sure there is always 10
centimeter of free space around the
appliance.
• This appliance is only to be used for
household purposes and only for the
purpose it is made for. In worst case the
food can catch fire. (i.e. do not use more
than one tea spoon of oil, no meat that will
release to much grease or water intended
for boiling foods.

PARTS DESCRIPTION

1. Condensation tray
2. Unit
3. Aerofryer grate
4. Pressure plate
5. Plate handle for Pressure Plate and Aerofry grate
6. Handle for Aerofry basket
7. Steam rack
8. Aerofryer basket
9. Aeroflow stand
10. Non stick cooking pot
Instruction manual
EN
5