System Requirements; Product Setup; Setup Wizard - D-Link DNR-322L Guide D'installation

SySTEm rEQUIrEmENTS

• Computer with Microsoft Windows
• PC with Pentium 4 – 2.4 GHz or above; at lease 512MB RAM
• Internet Explorer 7 or above
• Existing 10/100 Ethernet-based network

PrODUCT SETUP

SetUP wiZArd

Step 1:
Connect the included Ethernet cable to the network cable connector located on the rear panel of the
DNR-322L and attach it to the network.
Step 2:
Attach the external power supply to the DC power input connector located on the rear panel of the
DNR-322L and connect it to your wall outlet or power strip. Power is confirmed when the blue LED
Power Indicator located front panel is lit.
Step 3:
Insert the DNR-322L Driver CD in the CD-ROM drive. If the CD Autorun function does not automatically
start on your computer, go to Start > Run. In the run box type D:\autorun.exe (where D: represents
the drive letter of your CD-ROM drive) and click OK. When the autorun screen appears, click Install
and follow the on-screen instructions.
Step 4:
Click on the Start button to start the wizard, and follow the instructions from the Installation Wizard to
finish setting up your NVR.
dNr-322L
® ®
7, Vista , or XP
3