Rane TWELVE MKII Guide D'utilisation page 8

16. Deck Select: Selects which deck in the software is controlled by Twelve MKII. Up to four
Twelve MKII controllers can be connected with a Serato DJ Pro-enabled device provided
the device has enough channels. For instance, if you are using a two-channel mixer such
as the Rane Seventy-Two, only up to two Twelve MKII controllers can be connected and
only the first 2 channels will be available for selection. When you are using more than one
Twelve MKII controller at a time, you will need to determine which deck each controller is
assigned to:
i. Power on each controller. The available Deck Select buttons on all connected
Twelve MKII controllers will flash.
ii. Press the Deck Select button that corresponds to which deck you would like to
assign each Twelve MKII to. Once a Deck is selected and in use, the button LED will
be fully lit, and buttons for other available decks will enter a dim state.
iii. To switch to another available deck, press the corresponding Deck Select button.
iv. To unselect a deck, press and hold the corresponding Deck Select button for 2
seconds. When buttons for the available decks start flashing, you are ready to select
a new deck.
Bottom Panel Recess
1. Power Input: Use a standard IEC power cable (included) to connect Twelve MKII to a
power outlet. While the power is switched off, plug the cable into Twelve MKII first, then
plug the cable into a power outlet.
2. Power Switch: Use this switch to power Twelve MKII on and off.
3. Motor Torque: Flip this switch to adjust the torque of the platter. At the high setting, the
platter will have the heavier, stronger feel of "modern" turntables. At the low setting, it is
lighter and more graceful—the feel of a "classic" turntable.
4. USB Port: Use a standard USB cable (included) to connect this USB port to an available
USB port on the Rane Seventy-Two (sold separately) or your computer.
5. Audio Out (RCA): Connect stereo RCA cables to this output to send the internal timecode
signals to the input of a compatible mixer or other DVS-enabled device.
8
2
1
3
4
5