Cleaning Pad - WINBOT ECOVACS 950 Mode D'emploi

3. Operating WINBOT
Remove the Safety Pod.
3
Polish away any marks left on the glass
from the Safety Pod's removal with the
provided Finishing Cloth.
Notes: If WINBOT has a problem and the indicator Light flashes RED, it can be reset by pressing the
RESET Button on the Remote Control. See "Troubleshooting" for details.
Before performing cleaning and maintenance on WINBOT, Power OFF and unplug WINBOT from
the receptacle.

4.1 Cleaning Pad

Turn WINBOT over and remove the Cleaning
Pad. Soak the Cleaning Pad in cool, clean
water for 2 minutes. Hand wash with mild
detergent and lay flat to dry. Allow it to dry
completely before re-attaching it to WINBOT.
* Do NOT use a wet Cleaning Pad on WINBOT or it may slip on the window.
* Washing the Cleaning Pad regularly can extend its service life.
* If the Cleaning Pad becomes worn or no longer fits exactly within the Velcro area, replace it with a
new one to achieve best cleaning performance.
14
EN
Unplug WINBOT
4