Fully-Charged Battery; Removing And Repositioning The Battery - Cicli Esperia E210U Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

14.7. Check the LED indicators on the battery and the handlebar controller to confirm
that the battery is charged.
15.

Fully-charged battery

15.1. The battery is fully charged when the specific green light is displayed on the
charger.
NOTE: The charging can take 6-8 hours, depending on the residual charge level in
the battery.
15.2. Disconnect the battery charger plug from the 220V power socket.
15.3. Remove the second plug of the battery charger from the battery connector.
15.4. If removed from its housing, reposition the battery in the appropriate bicycle
housing and ensure it is well placed on the bottom.
16.

Removing and repositioning the battery

90
16.1. Insert the key into the appropriate lock
on the side of the bicycle.
16.2. Rotate the key 180°, this will free the
battery from its housing and extract it towards
the right hand side of the bicycle.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

E211d

Table des Matières