Table des Matières
Publicité
4
6.
Stellen Sie den Spiegelwinkel durch Drehen des
Kugelgelenks ein.
7.
Drücken Sie die Ein-/Aus-Taste, um die LED-
Beleuchtung einzuschalten.
8.
Drücken Sie nach dem Gebrauch die Ein-/Aus-Taste,
um die LED-Beleuchtung auszuschalten.
3.3. REINIGUNG UND WARTUNG
a)
Bewahren Sie das Gerät an einem trockenen, kühlen,
vor Feuchtigkeit und direkter Sonneneinstrahlung
geschütztem Ort auf.
b)
Es ist verboten, das Gerät mit einem Wasserstrahl zu
besprühen oder in Wasser zu tauchen.
c)
Entfernen Sie die Batterie aus dem Gerät, wenn es
über einen längeren Zeitraum nicht genutzt wird.
d)
Zum Reinigen ist ein weicher, feuchter Lappen zu
verwenden.
SICHERE ENTSORGUNG VON AKKUMULATOREN UND
BATTERIEN
Verwenden Sie für das Gerät AAA Batterien. Entnehmen Sie
verbrauchte Batterien aus dem Gerät. Führen Sie dazu die
gleichen Schritte durch wie beim Einsetzen der Batterien.
Entsorgen Sie leere Batterien bei den entsprechenden
Abgabestellen.
ENTSORGUNG GEBRAUCHTER GERÄTE
Dieses Produkt darf nicht über den normalen Hausmüll
entsorgt werden. Geben Sie das Gerät bei entsprechenden
Sammel-
und
Recyclinghöfen
für
Elektro-
Elektronikgeräte ab. Überprüfen Sie das Symbol auf dem
Produkt, der Bedienungsanleitung und der Verpackung.
Die bei der Konstruktion des Gerätes verwendeten
Kunststoffe können entsprechend ihrer Kennzeichnung
recycelt werden. Mit der Entscheidung für das Recycling
leisten Sie einen wesentlichen Beitrag zum Schutz unserer
Umwelt. Wenden Sie sich an die örtlichen Behörden,
um Informationen über Ihre lokale Recyclinganlagen zu
erhalten.
und
TECHNICAL DATA
Parameter
Parameter value
description
MAGNIFYING LED
Product name
VANITY MIRRORR
Model
PHY-CM-10
Dimensions [cm]
200x220x80
Weight [kg]
0,3
Power
3xAAA batteries (not included)
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
Only use indoors.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may
differ from the actual product.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
The terms „device" or „product" are used in the warnings
and instructions to refer to MAGNIFYING LED VANITY
MIRRORR.
2. USAGE SAFETY
a)
If you are unsure about whether the product is
operating correctly or if you find damage, please
contact the manufacturer's service centre.
b)
Only the manufacturer's service centre may make
repairs to the product. Do not attempt to make
repairs yourself!
c)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
d)
Keep packaging elements and small assembly parts
in a place not available to children.
e)
If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
f)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
g)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
h)
Clean the device regularly to prevent stubborn grime
from accumulating.
i)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
j)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
k)
Keep the device away from sources of fire and heat.
3. USE GUIDELINES
The cosmetic mirror is equipped with LED lamps
illuminating the workspace. The product is intended for
home use only!
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
1
5
4
3
2
1.
On / off button
2.
Suction cup
3.
Handle release
4.
360° ball joint
5.
Battery compartment
3.2. PREPARING FOR USE
ASSEMBLING THE APPLIANCE
1.
Open the battery compartment.
2.
Insert the batteries correctly.
3.
Close the battery compartment
4.
Prepare the place where the product will be installed.
The table or wall surface must be degreased, clean
and dry.
5.
Press the suction cup to the surface you have chosen,
then lock it by turning the mirror base clockwise.
6.
Adjust the mirror angle by turning the ball joint.
7.
Press the on / off button to turn on the LED light.
8.
After use, press the on / off button to turn off the
LED light.
5
Publicité
Table des Matières
