Putting The Pool Cleaner Into The Pool; Removing The Pool Cleaner From The Pool - Dolphin Maytronics Mass 10 Mode D'emploi

5.2 Putting the Pool Cleaner into the pool

5.2.1 Put the Pool Cleaner into the pool.
Release the Pool Cleaner and let it sink to the floor
of the pool.
Make sure that the floating cable is free of any
obstructions.

5.3 Removing the Pool Cleaner from the pool

5.3.1
Robotic Pool Cleaner Mass 10
The Pool Cleaner will now operate until it has
reached the end of the cleaning cycle.
User Instructions
|
5.2.2 Turn the power supply ON.
Turn OFF and unplug the power supply.
CAUTION
ON
5