Cleaning The Impeller - Dolphin Maytronics Mass 10 Mode D'emploi

8. CLEANING THE IMPELLER

If you notice debris trapped in the impeller:
Make sure the power supply is switched off and unplugged.
CAUTION
8.1 Clean the debris trapped in the impeller opening, according to the following
steps:
8.1.1
If the debris is not reachable follow the next
steps.
8.1.3 Pull the impeller cover backwards to release it.
Clean the debris trapped around the impeller.
Assemble the impeller cover.
10
8.1.2 Using a short
screwdriver open the 2 screws.
Robotic Pool Cleaner Mass 10 User Instructions
|