NGM Dynamic Wide Guide Rapide page 36

Connect to the Internet using Wi-Fi®
You can connect to the WLAN using Wi-Fi option. To activate it, from the main menu
choose Settings> WiFi I/O. Please follow all warnings and indications concerning the use of
wireless devices in areas where the use of such functions is restricted (airplanes, hospitals,
etc.). Go offline mode when you must use only the functions that do not require Network
access.
Connecting to a Bluetooth® device
Turn on the Bluetooth device you want to connect with. Refer to its documentation.
From the main menu, choose Settings > Bluetooth I/O to turn Bluetooth on. In the
contextual menu you will find additional functions and settings.
Choose Search for devices to start the automatical search for other Bluetooth devices
Among the discovered devices, select the device name to associate with. The phone will
attempt to associate with the device, which may be asked for a pairing code.
Connect to the Internet
From the main menu, choose
browsing. If you choose to navigate using data connection, be aware of costs or choose a
"flat" data contract with your service provider. Alternatively, use Wi-Fi (see "Connectivity")
where possible.
36 ENGLISH
Browser. Type the URL into the address bar to start