NGM Dynamic Wide Guide Rapide page 26

Insert the Battery
Your device is provided with a lithium-ion battery and is designed to be used exclusively
with original NGM batteries and chargers. The battery must be inserted into the backside
of the phone. Insert the battery into the battery compartment with its contacts facing the
corresponding ones of the phone. Next, restore the back cover by first inserting the bottom
of the phone and then pressing it on the top to insert it into the cover. To remove the
cover, start from the slit in the lower right corner of the phone and remove first the top
and then the bottom part, as shown below.
Upper part
Lower part
Slit
26 ENGLISH