Portable cassette speaker
1.) Connect the USB cable to a USB port located on your PC or laptop to charge the device.
First time use: Charge the device for about 8 hours. For normal use it needs to be charged for
approximately 1 hour to work for approximately 3 hours.
2.) To switch the device on/off, use the switch at the side of the speaker.
3.) When charging, the LED turns green. When playing, the LED turns red.
Safety precautions:
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or
damage caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic
products should not be mixed with general household waste. There is a separate collections
system for these products.
ENGLISH
To reduce risk of electric shock, this product should
ONLY be opened by an authorized technician when
service is required. Disconnect the product from mains
and other equipment if a problem should occur. Do not
expose the product to water or moisture.
2