Ec Declaration Of Conformity - Dolmar AB-1816 Manuel D'instructions

clockwise to make sure chain fixed well. During
adjustment, if the chain is fixed too tight, please turn
the nut counterclockwise and push the rear wheel
forward.
Parts
Locknut
Stem
Seat screw
Seat and fix the seat parts
Hub
Hub nut
Pedal
Handlebar
For European countries only

EC DECLARATION OF CONFORMITY

The undersigned, Tamiro Kishima and Rainer
Bergfeld, as authorized by Dolmar GmbH, declare that
the DOLMAR machine(s):
Designation of Machine:
Motor-assisted bicycle
Model No./ Type: AB-1816
are of series production and
Conforms to the following European Directives:
2004/108/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN55014-1: 2006, EN15194: 2009,
EN61000-3-2: 2006, EN61000-3-3: 2008,
EN55014-2/A2: 2008, IEC61000-4-2: 2008,
IEC61000-4-3: 2006, IEC61000-4-4: 2004,
IEC61000-4-5: 2005, IEC61000-4-6: 2006,
IEC61000-4-11: 2004
The following standards are used for safety:
EN14764: 2005, EN15194: 2009
The technical documentation is on file at:
Dolmar GmbH,
Jenfelder Straße 38, Abteilung FZ,
D-22045 Hamburg
15. 7. 2010
Tamiro Kishima
Managing Director
Standardtwist
14 – 18 N.m. The press sticker cannot show out
20 – 25 N.m. The safety line of stem cannot be seen
18 – 20 N.m. The safety line of seat post cannot be seen
18 – 22 N.m.
30 – 35 N.m.
35 – 40 N.m.
18 – 20 N.m.
18 – 20 N.m.
Rainer Bergfeld
Managing Director
If there are any parts needed to be adjusted, fix the
screw and other parts tightly according to the
requirements below. (Fig. 21)
Remarks
9