Maintenance - Spanset RSG-1-1000 LS Notice D'utilisation

edges or rough surfaces.
– The part of the load that is to be fastened to the SpanSet round sling
or bridle must be able to absorb the applied force.
– To save time, the SpanSet round sling or bridle can be placed over the
crane hook
V
– Do not attach the choker hitch over the area with the label to avoid
damaging it.

5 Maintenance

The term maintenance encompasses cleaning, repair and disposal.
5.1 Cleaning
Clean soiled or chemically contaminated SpanSet round slings or
bridles.
The following cleaning requirements must be met:
– Cleaning in industrial washing machines possible
(Warning: no metal parts),
– Use a commercially available washing agent with a pH of < 10
(Check the pH),
– temperature setting up to 30 °C max,
– do not spin-dry the product,
– leave it to air-dry.
5.2 Repairs
Repairs may only be carried out by the manufacturer or a person commis-
sioned by the manufacturer.
Round slings are repairable under the following circumstances:
– The label is damaged and the manufacturer is known.
– An exchangeable component is damaged.
– Only the tube cover is damaged.
5.3 Disposal
Disposal is the legal, appropriate and correct recycling or dismantling of
SpanSet round slings or bridles at the end of their life cycles. Disposal
of the SpanSet round sling or bridle must take place in conformity with
b
(see cover).
18