Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User Manual
05
06
A
B
07
CHANGING THE FLUORESCENT TUBE:
Use a fine-tippedscrewdriverto pry off the cover
as shown in the figure.
When one end has been released, pull up to
completely remove the cover.
To remove the fluorescent tube, grasp at both
ends and turn until the connection pins at the
ends are aligned with the lamp socket slots. (A)
Once the connection pins are aligned, pull the
fluorescent tube upwards until it is free of the
lamp sockets. (B)
Replacewith anotherfluorescenttube and repeat
the operation in reverse.
Press the cover back into place and make sure
that it is completely snapped in.
Connect the power cable to the GST-18
connection.
The product is installed.
For any questions on the profile frame, contact
us at:
oficinatecnica@ib-connect.com
05-06
Publicité
Table des Matières
